On today’s show, I discuss pins first dovetail layout, fishtail chisels, setting up a toothing plane, miter boxes, beginner projects, and lessons learned from revisiting old projects.
On today’s show, I discuss planing the edges of thin stock, dado planes, replacing the blade and chipbreaker in a transitional plane, woods, glues and finishes for outdoor projects, and dealing with wood movement woes.
On today’s show, I discuss finishing both sides of a board, book matching veneer, cooper’s jointer planes, workbench designs, pins vs. tails, hand tool jigs, boring straight with a brace and bit, and experimenting with historical practices in your shop.
On today’s show, I discuss hand planing vs. sanding before finishing, shoulder planes, working with long stock, side hung drawers, and moving your shop.
On today’s show, I discuss multiple irons for a try/jointer plane, clarifications on the fore plane, tips for planing square board edges, building a stand alone shop, and hammer veneering.
On today’s show, I discuss wood choices for tool boxes, traditional joinery methods for joining the corners of casework, dovetailing the corners of a box with angled sides, and lighting in the workshop.
On today’s show, I discuss tools for working with green wood, spring joints, cambering plane irons without a grinder, and the traditional names and setups for the bench planes.
On today’s show, I discuss making curved cabinet doors, dealing with warped boards, combination planes, and tips for improving your hand sawing.
On today’s show, I discuss keeping inset cabinet doors aligned, white pine for a workbench top, bevel up vs. bevel down smoothing planes, tongue and groove planes, and tips for working efficiently in a small shop.
On today’s show, I discuss using multiple tenons on wide table aprons, making cock beading with hand tools, workbench placement in the shop, edge jointing thick stock, and the pros and cons of the different types of hand planes.
On today’s show, I discuss working plywood with hand tools, making moldings with combination planes, strategies for working really hard woods with hand tools, getting started on a budget, and using screws in woodworking.
On today’s show, I discuss edge jointing, workbench tool trays, cupping boards, building a saw on a budget, and nails for building furniture.