Hand Tools & Techniques Podcast

HTT037 – Working with Reclaimed Wood

On today’s show, I discuss  shoulder planes, sanding after hand planing, web frames and dust boards, when to use mechanical reinforcement in your joinery, and working with reclaimed lumber.

Hand Tools & Techniques Podcast

HTT035 – Sliding Dovetails

On today’s show, I discuss  paring yellow pine end grain, using cambered irons to square board edges, making moldings with a combination plane, more on reference surfaces, and sliding dovetails.

Hand Tools & Techniques Podcast

HTT031 – Four Woodworking Myths

On today’s show, I discuss workbenches, butterfly keys, setting up a dado plane, chopping mortises square to the edge of the stock, and four common woodworking myths.

Hand Tools & Techniques Podcast

HTT027 – Experimental Archaeology

On today’s show, I discuss finishing both sides of a board, book matching veneer, cooper’s jointer planes, workbench designs, pins vs. tails, hand tool jigs, boring straight with a brace and bit, and experimenting with historical practices in your shop.

Hand Tools & Techniques Podcast

HTT015 – Just Questions

On today’s show, I discuss removing paint splatters from saw handles, adding bolsters to shop made chisels, boiling your own linseed oil, high bevel angle blades in low bed angle planes, making serpentine front drawers, and sharpening cambered blades.