No self respecting hand saw is complete without a proper nib.
Contrary to common belief, re-toothing a saw isn’t difficult at all, and doesn’t require any fancy expensive equipment. All it takes is a mil file, a tapered saw file (or two) and a little patience.
Mitered frames can be a challenge to build without specialized equipment. Even without the specialized miter trimming machines that are used by professional picture framers, the home woodworker can still make frames using a few simple common workshop appliances and techniques.
My most popular video on YouTube to date has been making the French style marking gauge. So here’s that original video for your enjoyment.
One of my subscribers asked a question about making compound angled dovetails. These are actually just as easy to saw out as dovetails on square corners. The difficulty is in laying out and making the compound angled butt joint that is necessary to make before laying out the dovetails. In this video I go over the process for laying out the compound angled butt joint and then cutting the subsequent dovetails.
I just finished building a Welsh style stick chair, but when assembling the arm and spindles to the seat, a small crack opened up in the arm. Here’s a cool trick for repairing these small cracks when a glue brush or syringe won’t fit.
Part 2 of a two part series on making a wooden bodied spokeshave from scratch.
Part 1 of a two part series on making a wooden bodied spokeshave from scratch.
Try these three tips to improve your hand sawing.
In this video, I demonstrate an exercise I call “saw without sawing”. This short exercise helps to teach the new hand saw user what it feels like to take the weight of the saw off of the wood when starting a cut with a hand saw, and makes for more precise cuts.
If you don’t have a band saw, you can still resaw thick boards into thinner boards, or make your own shop sawn veneer. In this video, I demonstrate the use of a frame saw for resawing by hand.
One of the questions most often asked by new woodworkers, and most often waffled on by experienced woodworkers in not HOW to sharpen but WHEN to sharpen.