On today’s show, I discuss workbenches, butterfly keys, setting up a dado plane, chopping mortises square to the edge of the stock, and four common woodworking myths.
Thanks to Joe Deslauriers, William Elliott, Arkadiusz Cwikowski, Bill Warnock, Krister K., Lawrence Pylinski, Jeff Skiles, Matt McGrane, Jared Tohlen, Chris Barnes, Lance Stuchell, John Schuster, Steven Danenman, Kyle Groff, Jeff Mertz, Alex Young, Paul Joynes, Christopher Steenbock, Ethan Sincox, Michael Davis-Cheshire, Hernán Coronel, Jeremy Turner, Zayd Zaytoon, Hugo Baillargeon, Scott Runnels, Mark Benson, Cameron Broome, Ted St. John, Dave Challis, Dave Nonomura, John Baird, and Jason Zvokel for your support on Patreon.
- Don had great success improving his hand sawing after listening to the podcast on sawing straight.
- Jonathan had some feedback on the Millers Falls two-piece lever cap (not chipbreaker) that was discussed in Episode 30.
- Sean is having trouble choosing between a traditional English bench, and a traditional continental European bench with a shoulder vise.
- Hugo has some questions about butterfly keys.
- Brian is looking for some tips on setting up a dado plane.
- Dave is having trouble chopping his mortises square to the edge of the stock.
Today’s main topic is busting four common woodworking myths.
Feedback, Questions or Topic Suggestions?
If you’d like to submit something for the show, send a voice note recorded on your phone to firstname.lastname@example.org. You can also leave a voicemail at (276) 601-3123 or use the contact form on the Contact page.
How to Support the Show
If you’d like to support the show, you can do so by visiting the Support page.