On today’s show, I discuss hand saw handle size, inexpensive hand tool friendly woods, hiding a rabbet or groove in the bottom of a dovetailed box, replacing marking gauge pins, and hand tools that I wouldn’t be without in my kit.
Thanks to Joe Deslauriers, William Elliott, Arkadiusz Cwikowski, Bill Warnock, Krister K., Lawrence Pylinski, Jeff Skiles, Matt McGrane, Jared Tohlen, Lance Stuchell, John Schuster, Steven Danenman, Kyle Groff, Jeff Mertz, Paul Joynes, Ethan Sincox, Michael Davis-Cheshire, Hernán Coronel, Jeremy Turner, Zayd Zaytoon, Hugo Baillargeon, Scott Runnels, Cameron Broome, Ted St. John, Dave Challis, John Baird, Jason Zvokel, Jay Derenthal, Sebastian Beckmann, Reagan Herman, Thomas Feller, Roberto Holguin, Alex Young, Rob Bennett, Tim Morris, Gray Keene, Rob Switzer, Mike Holzhauer, John Gargano, Lawrence Schlack, Gary Wiskofske, Andrew McNaughton, Elmer Nahum, Peter Faulks, Ivar Sande, Thomas Corbin, Jacob Norton, Richard Yeskoo, Ray Deftereos, and Borja Fernandez Sierro for your support on Patreon.
- Ray has a question about hand saw handle size.
- Mark is looking for inexpensive, hand tool friendly hardwoods.
- Hugo wants to know how to hide a rabbet or groove in the bottom of a dovetailed box.
- Ed needs to replace the pins in an old marking gauge.
Today’s main topic is about hand tools I wouldn’t want to be without in my kit.
Feedback, Questions or Topic Suggestions?
If you’d like to submit something for the show, send a voice note recorded on your phone to email@example.com. You can also leave a voicemail at (276) 601-3123 or use the contact form on the Contact page.
How to Support the Show
If you’d like to support the show, you can do so by visiting the Support page.