On today’s show, I discuss drawboring large tenons for workbenches, tools for spoon carving, plow planes, and camber on bench planes.
On today’s show, I discuss workbenches, butterfly keys, setting up a dado plane, chopping mortises square to the edge of the stock, and four common woodworking myths.
On today’s show, I discuss two-piece chip breakers, smoothing plane setup for controlling tearout, when to use haunched tenons, troubleshooting a smoothing plane, and scratch stocks.
On today’s show, I discuss pins first dovetail layout, fishtail chisels, setting up a toothing plane, miter boxes, beginner projects, and lessons learned from revisiting old projects.
On today’s show, I discuss planing the edges of thin stock, dado planes, replacing the blade and chipbreaker in a transitional plane, woods, glues and finishes for outdoor projects, and dealing with wood movement woes.
On today’s show, I discuss hand planing vs. sanding before finishing, shoulder planes, working with long stock, side hung drawers, and moving your shop.
On today’s show, I discuss multiple irons for a try/jointer plane, clarifications on the fore plane, tips for planing square board edges, building a stand alone shop, and hammer veneering.
On today’s show, I discuss tools for working with green wood, spring joints, cambering plane irons without a grinder, and the traditional names and setups for the bench planes.
On today’s show, I discuss making curved cabinet doors, dealing with warped boards, combination planes, and tips for improving your hand sawing.
On today’s show, I discuss keeping inset cabinet doors aligned, white pine for a workbench top, bevel up vs. bevel down smoothing planes, tongue and groove planes, and tips for working efficiently in a small shop.
On today’s show, I discuss using multiple tenons on wide table aprons, making cock beading with hand tools, workbench placement in the shop, edge jointing thick stock, and the pros and cons of the different types of hand planes.
On today’s show, I discuss working plywood with hand tools, making moldings with combination planes, strategies for working really hard woods with hand tools, getting started on a budget, and using screws in woodworking.